Cookie Img Back to top
Home » Products » Lighting Mast Towers » 7 (9) Meter Mobile Telescopic Tilting Type Tower

7 (9) Meter Mobile Telescopic Tilting Type Tower

7 (9) Meter Mobile Telescopic Tilting Type Tower
Send Inquiry
Product Code : Sigma08
Brand Name : Sigma
Product Description

We provide you next generation Mobile Telescopic Towers. Manufactured at our state-of-the-art production facilities, these towers are reckoned for lightening up your work areas for enhancing your workforce competence and inclusive productivity and also guarantees safety at the time of constructional activities through dark hours. Mobile Telescopic Towers are designed in a manner that makes them sturdy as well as energy effectual. These are known to emit strong white/yellow light. They possess aluminum reflectors for ensuring reduced glare, condensed required wattage and better performance.

For application competences with comprehensive 360° rotatable light board, these are seamless companions for construction sites, mining areas, defense necessities, civil engineering works, and industrial procedures.

  • Exclusive heavy-duty apex roller interactions
  • Engineered with custom Aluma pulleys
  • Fixed upper and lower mast plates
  • Guy wire extra ears for more obtainable capacity
  • Building or trailer straddling selections

Specification for 7 (9) Meter Mobile Telescopic Tilting Type Tower
With Green Genset & Acoustic Cover (CPCB Approved)

Type of Towers

Telescopic tilting type, Trolley mounted having pneumatic / solid rubber tyres

Material of construction

M.S. Plates formed into octagonal / polygonal shape.

Regional basic Wind speed

a. 33/m/Sec (118 km/hr) b. 44 m/sec (158 km/hr)
c. 50 m/sec (180 km/hr)

Gust Factor


Topography configuration

a. 1.0 b. 1.3

Mean probable design life

25 years

Height of the towers

9 meter including the height of trolley & cradle

Height Variation Factor

As per IS Code 875:1987 (Part 3)

Terrain Category

Category 1 Class A as per IS 875:1987 (Part 3)


Motor operated / manually operated

Number of Lights Cradles

One /Two.

Number of Lights

Four/Six. The Tower would be designed with a provision for at least 4 lights to be fitted on one side of the cradle if required.

Area of Cross Section of the Luminaries

As per design of the luminaries offered.




No. of Lights

D. G. Set Capacity


Trolley mounted
Ground mounted

Manually operated
Motor operated

Four / Five
Six / Eight / Nine

7.5 KVA

Pneumatic Tyres
Solid Rubber Tyres

Hinging /

The system would an arrangement for installing and maintaining lights at ground level. The tilting arrangement of the Tower would be perfectly balanced and would not give any jerk or need a push / pull to activate the operation.

Trolley Base

The trolley base would be fabricated from channel frame work. The base would be provided with suitable number of riggers of suitable extendable length to provide complete stability of towers when fully erected. The riggers after extension would be grounded with the help of screw jacks having suitable free base of steel / cast iron. The trolley would be fitted with a tow-eye, tail light reflectors etc.

and Painting

The total tower structure shall be given anti rust treatment by painting after sand blasting. Before painting two coats of primer shall be applied. During final painting of complete tower structure standard safety color codes hall be complied with so as to provide clear visibility to the operation of dumpers, dozers, tippers etc. for safety against collision / damage during night time.

Mast Lighting
Control Panel

The MLCP shall be of outdoor type having IP 55 class of protection with incomer for power from mains/DG Set. 30mA RCBO of adequate rating shall be provided as main incomer and MCBs shall protect the outgoing cables from short circuit. The cables from MLCP to the individual luminaries shall be prewired and so laid and protected that it does not infringe with raising and lowering of the segments of tower. For motorized winches the interlocking arrangement should be provided to ensure that the tower tilting winch cannot be operated while the tower is in telescopic mode and vice versa. Suitable transformer can be incorporated into the system to meet the specific output requirements.


We can supply complete design calculation for the towers selected. Most of our towers are type tested by a Govt. Test Laboratory.


P-27 Sagar Manna Road, Behala, Near Parnashree Bus Stand, Kolkata - 700060, West Bengal, India
Phone :+917259681346
Fax :91-33-24061722/24061249
Ms. Vnu Mehta (Director)
Mobile :+919433016082, +919748773292
Mr. Divesh Mehta
Mobile :+919433016083, +919831816083
Trust Stamp
Product Showcase